Doubles DDR Pads? Great Idea!

BoyWunder8806 · Posted: Sat Oct 18, 2003 9:59 pm Post subject: Doubles DDR Pads? Great Idea!

I Had An Idea! Wow, Thats A First!

Ok. I Really Like Playing Doubles And I Don't get To Go Out To The Mall Or Arcade To Play DDr a lot, so i play at home. but when i try to play with my ignition pads, they tend to move away from each other and i miss the buttons all the time. Well, Here's My Idea. What If The Pads were like zipped together? i mean, you can unzip them if your playing single, or zip them together when you playing doubles. i think its a great idea. Cause usuing duct tape doesn't always work for me!

What Do you People Think? i mean, it sounds simple, but i mean, if they would make Version 3 Ignition Pads or something like that, They Could Add Zippers to it Or something to keep the pads together.

Well, Tell me What You Think!
_________________

I desire the end
The touch of armageddon
This world encased in flames...
Bodies lie beneath fallen kingdoms...
...I walk on fallen kingdoms...
...I desire the end...
...I desire the new beginning

Shinmizu · Posted: Sat Oct 18, 2003 10:16 pm Post subject:

Cobalt Flux pads have a doubles kit to connect two pads together. I don't know about the Red Octane metal pads, but they might, too.

The legend of ZAKU 0079 · Posted: Sat Oct 18, 2003 10:17 pm Post subject:

Sounds like a good idea, seeing if the foam padding can be broken down into storable sections and that the pad fold in two without the padding. If this pad idea fall under, you can always keep both pads in place by using duct tape to bind the bottom of both inner sides.
_________________

My LiveJournal brings glory to Zeon! So does my Myspace!

BoyWunder8806 · Posted: Sat Oct 18, 2003 10:18 pm Post subject:

i mean, the zipper could be above the other zipper where you insert the foam and all, but its a great idea i think
_________________

I desire the end
The touch of armageddon
This world encased in flames...
Bodies lie beneath fallen kingdoms...
...I walk on fallen kingdoms...
...I desire the end...
...I desire the new beginning

thetaller1 · Trick Member Joined: 26 Jun 2003 Location: Ur Momma

you can do my softpad mod, my pads have yet to move [its been 2 years]...

...and if you read it, you could even have the same pieces of wood!
_________________

My DDR Auction site [HOT!!!]:
http://scripts.cgispy.com/auctions/auction.pl?user=thetaller1
My softpad MOD: http://www.angelfire.com/film/njohnson/tt1softpadmod/index.htm
PM me your pics if you did my softpad mod!

YmkFX · Trick Member Joined: 24 Jul 2003 Location: California

If you play like me that zipper would be pulled apart and shredded in a matter of days under the stress.
_________________

GFBeach · Trick Member Joined: 08 Aug 2002 Location: Georgia USA

I have two BNS Ultra-DX pads (Ignition 2.0) and I have them have them mounted on wooden boards, then the two boards are literally latched together. These are the same kind of latches you put on fences or tool shed doors--- these things haven't separated once. The only trick is that you'll have to drill holes to guide in the screws that hold the latches in place and then file the ends of the screws that poke out through the bottom of the board, but it's a relatively inexpensive mod that's surprisingly effective. I'll try to get pics of it sometime.

BoyWunder8806 · Posted: Sun Oct 19, 2003 12:31 pm Post subject:

BoyWunder8806 · Posted: Fri Oct 24, 2003 8:19 pm Post subject:

anyone have any other ideas for ignition pads?
_________________

I desire the end
The touch of armageddon
This world encased in flames...
Bodies lie beneath fallen kingdoms...
...I walk on fallen kingdoms...
...I desire the end...
...I desire the new beginning

cRazY FeeT · Trick Member Joined: 25 Dec 2002 Location: SoCal

I use velcro to hold my ignitions together.

NeoNex · Trick Member Joined: 29 Jul 2003

i think its a pretty good idea if only there was some way to connect them to soft or even modded pads that you already have
_________________

this land is made.....this land is made of LOVE AND PEACE!!!
GaMeRtAg:NeoNex

jtrobot · Trick Member Joined: 02 Oct 2003 Location: De Pere, WI