Just finished a XBOX 360 control box for my Cobalt Flux

irishman · Basic Member Joined: 18 Aug 2003

Hey Guys,

I posted here because im very excited about it. There has not been a lot of hard pad support for the Xbox because of the priopritary hardware that Microsoft needs for its dance pads.

I just followed SinistarX's instructions.
http://www.sinistarddr.com/minicbox.html

However, I found an easier method of soldiering the conections. I left the soilder points on the top of the card alone, and scraped off the contact points on the underside till they were nice and shiny and soldiered there. IT worked much easier.

Unfortunately I burned through 2 Mad Catz dance pads (at $20.00 each) before I figure it out.

If anyone else is interested, Id be happy to post a guide. I dont know if there are a lot of CF/360 owners out there.

Irishman

Suko · Trick Member Joined: 13 Jun 2003 Location: Lynnwood, WA

I'm interested in a guide with LOTS of pictures. I'm not positive I'll be up to doing this mod, but I've been wanting to get the DDR Universe games for a while now, and the inability to use my CF on it has been a big bummer.
_________________

"Arcades have gone away but the culture is not gone."

DDRecall | Groovestats | Beatspace | UI Bemani Club | Suko's Shirt Shack