MyMyBox Nexen/Blueshark/etc Official Thread

[videoCWK]

Hey guys. Anyone remember me? I haven't been here in so long.
Anyway, has anyone here gotten/evaluated MMB's PIU pad yet? I know they have a wonky reputation, but they make the only metal pump pad I can find. I'm looking for one because even though I have a CF, it's not right for Pump, and DDR has become so boring for me.
_________________

[kahlandotorg]

For anyone who lost the Blueshark cable, you can construct a new one with a ps2 controller and some soldering. Check these pinouts again before using them, but to save someone time:

BlueShark 2" pinouts
1: Right Arrow
2: Left Arrow
3: Down Arrow
4: Up Arrow
5: Ground
6: Red Button
7: Unused
8: A Button
9: Unused
10: B Button
11: Unused
12: Unused
13: Unused
14: Unused
15: Green Button

Hope that helps someone.

[loyx]

[neothe0ne]

BEWARE THE STATIC ELECTRICITY!

So I was scratching an itch, touched the bracket of an arrow for whatever reason, and was shocked. This shock blew my PS2 control box out of the water.

After determining that my computer's Parallel port and adapter were fine, as well as the BlueShark's cable (since I've made it a habit to always have at least one backup control box, not only because it's MyMyBox), I can look back at it and LOL. But when my pad stopped responding, I was scared ****less.

Don't let it happen to you!
_________________

Wordpress
Groovestats

[SML2.THV]

Has anyone visited the MMB website lately? They've taken the Blueshark COMPLETELY off their page now. I guess they really aren't selling them at all anymore. Good thing I got mine before it was too late .
_________________

Need a Lockerz invite? Hit me up.

[DS]

My Blueshark pad recently stopped working. I stopped playing DDR for a few months and started playing again. I've also moved it around recently, but I doubt any of these things are likely causes for the problem. I've confirmed the problem is with the pad since the control box is still functional. However, since I have no knowledge on the hardware of my pad, I'm not sure where to start fixing the problem. Help?
_________________

Looking for a worthy avatar/sig.

[kahlandotorg]

For anyone trying to use this pinout, it's backwards. Pin 1 is ground, then up down left right. Sorry for the confusion. B is pin 6, A is pin 8, green is 11.

[Rajjab]

question on making your own bars

i got an used 3" blueshark with the 2 holes to put the original bar, but i want to build a bar without needing the holes. is it safe to install your own bars right from on top? i removed the metal covering and i noticed that it's compressed particle wood. is it safe to install custom bars by drilling into that? since it's compressed particle wood, it might not be strong enough and it has the chance to crack.

thanks
_________________

Groovestats <3 doubles

sup i play Gunbound also

[Marq(uistadorous)]

[neothe0ne]

[invalidname]

Is MyMyBox still in business?

I ordered two soft pads from them a week ago and haven't heard anything: the order status hasn't updated (last time, they shipped within two days), they haven't responded to an e-mail, and their phone number goes straight to voice mail. This despite the order status page saying In the event you do not receive a shipping notification from us within two business days of ordering, we want to hear from you. Please contact us at 1-213-291-8789.

I'm not feeling too good about this.

[yukihime]

[invalidname]

[invalidname]

[SML2.THV]

Alright guys, my Blueshark control box recently started fucking up, and I need some help. The issue is that whenever I plug my pad into my PS2 to play DDR, it immediately fails me out. Thinking it was something with the Start button, I plugged into my USB adapter and tested the input in ITGPC. I was right. The Start button is always registered as being pressed, even when I unplug the cable from the Blueshark. Halp.

tl;dr The start button is always pressed down even when it isn't.
_________________

Need a Lockerz invite? Hit me up.

[8ftmetalhead]

I'm guessing it's a plastic box with raised plastic buttons sticking out of it?
Easy fix then. Open it up, unscrew the start button, snip the wires, and take the button to your local electronics store and ask for a suitable replacement.
Then, bring it home, and wire it back into the box. You can either solder it or even strip and twist the ends of the wires that attach to it and loop it through the button's pegs, if it has them.
Assuming your box is laid out as i'm guessing it is.


Or try ordering a replacement control box, either or.

stupid forum won't submit my damn reply
_________________

The Zenius - I - Vanisher homepad building and modding thread!
http://zenius-i-vanisher.com/v5.2/viewthread.php?threadid=3350&page=1

[Fred__]

Hi all !

I have been away from DDR for 2 years and a half but now that I have a house and a basement, it's time to get back at it I am looking for a good metal pad. I obviously browsed the forums in search of info but there are so many posts it's hard to go through everything.

First, here is what I am looking for:

A pad that is accurate, sensitive and that will last. I must be able to feel where the arrows are on the pad. The pad must be PS2 and PC compatible. Also it's nice if it's repairable if it breaks.

I usually play with shoes but like to play in socks once in a while. When I stopped playing I was at 9-10 feet depending on the song.

From what I read it seems the blueshark is the thing but it's not for sale anymore. The next best bet seems to be the Nexen. Is this correct ? People seem to enjoy it more than the Cobalt Flux ? Apart from that I haven't heard of any other suitable pad and this is where I might be wrong as I have not read all the posts and reviews.

One last question; I don't use the bar much yet but I guess I will more and more as I progress so is it a good thing to get a pad with a bar or the only useful bars are the ones you build yourself ?

Thank you !

[Suko]

Unfortunately, Cobalt Flux pads are about the only things available these days. I have one from 2005 or 2006 and I think they're great, but people who've gotten them recently don't seem to think they're too hot anymore. I couldn't tell you if they're just being picky or not.

As far as I know, Blue Shark and Nexan pads are unavailable, and I wouldn't hold your breath waiting for them to come back. Personally, if I were you, I'd just get a CF off craigslist or buy them new. Despite what people say, the design of the CF is so simple and durable that I can't understand how it's possible for these things to not work half-decently. Don't forget to check the marketplace forums on bemanistyle.com and your local craigslist to see if anyone has some blue sharks or CF's for sale. Although very few people post in DDRFreak's marketplace forum, it's still work checking once every so often, because a lot of people try to sell off their old pads there too.

As far as bars go, many people just use a chair as a make-shift bar. I personally would build my own, or use a handtruck or something and place it (or bolt it) to the underside of my pads.

_________________

"Arcades have gone away but the culture is not gone."

DDRecall | Groovestats | Beatspace | UI Bemani Club | Suko's Shirt Shack

[Fred__]

Nexen seem available on mymybox website, I made it to the credit card step even though the say they don't ship those anymore it did calculate a shipping cost for my location... Anyone knows if I will get one if I order it ?

No decent dance mat in my local craigslist