Forums FAQForums FAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister   ProfileProfile   Login to check your private messagesLogin to check your private messages   LoginLogin 

Best home-built hard pad given my criteria?
 
This topic is locked you cannot edit posts or make replies    DDR Freak Forum Index -> Bemani Controllers
View previous topic :: View next topic  
Author Message
rlpowell
Trick Member
Trick Member


Joined: 11 Dec 2003
0. PostPosted: Mon Mar 24, 2008 3:04 pm    Post subject: Best home-built hard pad given my criteria? Reply with quote

So in talking with my gf (we want a pair of pads to play on) we decided that we weren't willing to buy hard pads, simply because they are going to break sooner or later, and we need to be able to fix them ourselves. We really don't want to make a purchase of that size twice.

So, I'm hoping y'all can help us pick a good homebrew kit, given these criteria (in order of importance):

1. Easy to repair.

2. Can support fairly heavy people (I weigh about 250 pounds/115 kg).

3. Not too horrendously difficult to build; I've built http://www.geocities.com/ddrhomepad/ in the past without too much trouble.

4. Reasonably durable components; "easy to repair" does not mean I want to have to do so every time I play. E1.gif

I've noticed http://members.aol.com/tenk/ddr/intro.htm as a possibility, but I'd love to hear if there's anything better.

Oh, and did DancingTofu ever get off the ground selling his pads?

Thanks.

-Robin
Back to top
View users profile Send private message Send email
Lawrencesss
Basic Member
Basic Member


Joined: 07 Oct 2007
1. PostPosted: Mon Mar 24, 2008 7:44 pm    Post subject: Reply with quote

Devout Stealth Homepad.

Satisfies all of your requirements!

I can attest to its durability, I played on it at 300 pounds.
Back to top
View users profile Send private message
rlpowell
Trick Member
Trick Member


Joined: 11 Dec 2003
2. PostPosted: Mon Mar 24, 2008 7:59 pm    Post subject: Reply with quote

Lawrencesss wrote:
Devout Stealth Homepad.

Satisfies all of your requirements!

I can attest to its durability, I played on it at 300 pounds.


Huh. I looked at it at one point, saw aluminum foil, went "Ick" and moved on. Usually that's the kiss of death, as as soon as the foil tears, nothing ever works right again. Is the design here special enough that that's not true?

-Robin
Back to top
View users profile Send private message Send email
rlpowell
Trick Member
Trick Member


Joined: 11 Dec 2003
3. PostPosted: Mon Mar 24, 2008 10:23 pm    Post subject: Reply with quote

Lawrencesss wrote:
Devout Stealth Homepad.

Satisfies all of your requirements!


Sorry, but I'm missing something. That looks *horribly* hard to repair; if there's a problem with a contact, you have to take the whole thing apart, scrape off the foil, fix the wiring, re-expoxy the foil, and re-assemble??

-Robin
Back to top
View users profile Send private message Send email
Lawrencesss
Basic Member
Basic Member


Joined: 07 Oct 2007
4. PostPosted: Tue Mar 25, 2008 1:27 am    Post subject: Reply with quote

The foil is epoxied to wood, and totally sealed, so there is no possibility of any scratching, if you spread the epoxy around then it will be years and years until you get any damage from the negligible horizontal movement of the panel. The nature of the penny contact means there is never any movement there, so no real risk of damage.

If something does go wrong, just unbolt the panel, lift it up and see what is wrong.

The only issues I have ever had with my 3 Stealth pads, is I had a wire break in a D9 connector I used for the wire to the control box. I also dropped an axe head on one of the panels which put a dent in the sheet metal, was a 5 minute repair since I had made spare sheet metal cap

If you are so mistrusting in foil, then replace it it with some sheet metal with the corners snipped off.

One additional thing I would recommend, is drilling a hole through the wooden panel in the corner to allow for the release of air pressure.
Back to top
View users profile Send private message
ChilliumBromide
Trick Member
Trick Member


Joined: 16 Jun 2006
Location: Beaverton, OR
5. PostPosted: Wed Mar 26, 2008 11:42 pm    Post subject: Reply with quote

From a design standpoint, I can attest to the Stealth's perfection. Devout is well versed in electronics and engineering compared to the average person on this forum. It's cheap, durable, and simple. If you do the foil right, it will not tear, and if it did, you wouldn't be able to scrape it off. epoxy is intense stuff.
_________________
I used to be active here lol
Back to top
View users profile Send private message Send email Visit posters website AOL Instant Messenger Yahoo Messenger Xbox Live Gamertag MSN Messenger
rlpowell
Trick Member
Trick Member


Joined: 11 Dec 2003
6. PostPosted: Fri Mar 28, 2008 11:17 am    Post subject: Reply with quote

Lawrencesss wrote:
One additional thing I would recommend, is drilling a hole through the wooden panel in the corner to allow for the release of air pressure.


I'm not following that part; can you explain in more detail?

-Robin
Back to top
View users profile Send private message Send email
slvrshdw
Trick Member
Trick Member


Joined: 05 Jan 2005
7. PostPosted: Mon Mar 31, 2008 11:30 am    Post subject: Reply with quote

basically, make sure the arrow well has a break in it.

[_] <- like that, if it makes sense.

just drill/dremel out some room for air to move. it will help it work better
_________________
Back to top
View users profile Send private message Send email Visit posters website AOL Instant Messenger
devout
Trick Member
Trick Member


Joined: 15 Dec 2006
Location: the atl
8. PostPosted: Wed Apr 16, 2008 9:44 am    Post subject: Reply with quote

Who there called mah name?!

I don't know if my pad is best for you or not, and I try not to ever "recommend" it to anyone (I'm sure you can come to your own conclusions about it without me telling you how to feel). For me it was the third pad I made, and by far the least frustrating and least expensive.

Anyway, even if you don't build it, you might want to take some ideas from it, since I do think it has the potential to be pretty durable. If you can figure out what you like and don't like you can probably modify it pretty easily to meet your needs. A lot of people seem to not like the tin foil (aka pretty much everybody) so I'm still hoping some day someone will replace it with sheet metal and post some pics/instructions here and we'll have a new design to talk about.

Good luck with your homepadding, wherever it takes you E4.gif
_________________
the world's most refined homepad: devout stealth

Almost-finished non-Stealth homepad for sale, just add sensors! see here: http://www.ddrfreak.com/phpBB2/viewtopic.php?p=8921579#8921579
Back to top
View users profile Send private message
rlpowell
Trick Member
Trick Member


Joined: 11 Dec 2003
9. PostPosted: Thu Apr 17, 2008 2:27 pm    Post subject: Here you go. Reply with quote

I made a thread for my even-simpler (but much uglier) design:

http://www.ddrfreak.com/phpBB2/viewtopic.php?p=8862015

-Robin
Back to top
View users profile Send private message Send email
rlpowell
Trick Member
Trick Member


Joined: 11 Dec 2003
10. PostPosted: Thu Apr 24, 2008 1:01 pm    Post subject: Re: Here you go. Reply with quote

rlpowell wrote:
I made a thread for my even-simpler (but much uglier) design:

http://www.ddrfreak.com/phpBB2/viewtopic.php?p=8862015


Is it so bad no-one even wants to say how bad it is? frown.gif

-Robin
Back to top
View users profile Send private message Send email
Display posts from previous:   
This topic is locked you cannot edit posts or make replies    DDR Freak Forum Index -> Bemani Controllers All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2 © 2001, 2002 phpBB Group