MyMyBox Nexen/Blueshark/etc Official Thread

[EvilDave219]

out of curiosity, can someone tell me why this blueshark is $800?

http://mymybox.com/ddrmbsarc.html

It looks exactly the same as a regular blueshark as well. Only thing I could think of is if it had 4 sensors in the arrows instead of 2, but that still wouldn't justify doubling the price.
_________________

pfffffffffffffffffffffffffffffffffffffffffffffffffffffffffff

[slvrshdw]

yeah, thats basically the only difference

the sensors make up a pretty big chunk of the price, but i agree with it being overpriced for it

if you *needed* 4 per arrow, just get the 2 per arrow, and buy the kit for 8 more


4 per arrow is identical to the arcade, i know that, but for home use, 2 is fine
_________________

[PureBlue]

Hi, I have a question. I have a 3 inch BlueShark, and the left arrow constantly gives me pad crap. I checked the sensors, and they were all bent and I couldn't really get them back into place. Should I order new sensors, or just throw my BlueShark in the garbage?

[gerardoddr]

If you bought it no more than 6 months ago, you should call Mymybox and tell them to replace it

If you have more than 6 months with the pad then you're stuck with buying new sensors or just use it like a big paperweight.

I suggest the first.

[acezor]

i have a 3 inch blueshark too, and my O button no longer responds..am i screwed or is there anything I can do about it, like a new sensor or something? Thanks, and I got it over 6 months ago.
_________________

yo..tis ace

[gerardoddr]

The O and X buttons aren't sensors

they are just sheet metal, so you just have to move the arrow and clean the sheet metal, or maybe replace it.

In the worst case, the wiring may be damaged, then you will need to solder.

[acezor]

hmm yea I opened it up and took a look at it, how do I know exactly what i'll have to do?
_________________

yo..tis ace

[gerardoddr]

If its dirty (like dirt or mud) just clean it with alcohol and cotton

maybe its rusted (i don't think so) and you will have to replace the sheet metal

you can also grab a piece of wire and touch the two parts of the Circuit board so you can "close the circuit", if it responds, then its not the wiring.

[Rene_A]

All of 3 inch BlueShark Metal Pads are Sold Out.
More pads will be arriving March, 2008.
Exact date comming soon!

Honestly now MYMYBOX its March 21st. Get on it.
_________________

bleedingdonkey (9:55:35 PM): HAI
bleedingdonkey (9:55:40 PM): I NOTICED
bleedingdonkey (9:55:43 PM): THAT YOU AAA'D SEVERAL SONGS ON DDR
bleedingdonkey (9:55:47 PM): I AM PROUD OF YOUR ACCOMPLISHMENTS
Rene Aq (9:55:58 PM): OMG WHY THANK YOU SIR

[FwAnkY Bouy]

[Future Master]

Which pad is better, the blueshark 2 inch 2007 edition or the blueshark 3 inch no bar? Does the extra screws on the blueshark 2 inch fix the problems with the brackets?
_________________

Remember this name i will be your master someday...

[SML2.THV]

[Shoryuken1988]

the 3" seems like it should be better because it costs more.

[Shoryuken1988]

sorry, i accidentally posted a lot. i can only edit the posts so it seems like i didnt spam. how do u delete?

[Shoryuken1988]

check my post underneath, it it worth waiting for mymybox for newer pads to come in or check the website below?

[Shoryuken1988]

What do you guys think about this? Is this a real site selling BLueSharks?


http://www.vivazone.com/mbsgxg6.html


also should i just buy a used blueshark or get a cobalt flux?
or should i just get a new blushark?
this one is selling for as much as the 3" one on the mymybox site.

[Shoryuken1988]

so is the 3" blueshark better than the 2" blueshark?

also the website selling the blueshark w/ a bar doesn't say if it's a 3" pad, but the mymybox doesn't sell 2" pads with bars. it's a little confusing



also if anyone cares heres a response about the blusharks from mymybox


Sorry we are expecting our pads to be in stock sometime around April.
You can reserve a pad by responding back to this email requesting a 2 inch
or 3 inch Blue shark metal pad. Include your name and address. We will
inform you when the pads will be instock so that you can order one.

----- Original Message -----
From: xxxxxxxxxxxx
To: <[email protected]>
Sent: Wednesday, March 26, 2008 2:39 PM
Subject: BlueShark metal pads

[RubenxCore]

Wow.. pushed back to april now.. seriously, this company needs some organization. Next thing we know is they're pushed back to august or some bs like that. I just can't wait for Blueshark

[SML2.THV]

Why not try the ddrfreak marketplace? There's a dude selling a 3" with bar for $250, unless you're not in the United States.

Also, for general reference to anyone, I made a video reviewing the 2" Blueshark. Just for future reference I'm not trying to whore my vids =/. Clicky[/url]
_________________

Need a Lockerz invite? Hit me up.

[RubenxCore]

2" Blueshark pads are in stock !!