| View previous topic :: View next topic |
| Author |
Message |
MasterInuYasha
Trick Member
Joined: 09 Nov 2006
Location: Columbus, Montana |
0.  Posted: Mon Feb 25, 2008 9:16 pm Post subject: Pad troubles |
 |
|
Okay, Since the Home made pad thread is basically dead. I'll ask here. I kinda need a fast response.
When wiring up a Home pad, using the soft pad control box. Is it better to run each of the ground wires to the PCB, or run ONE wire from the PCB and just run all of the grounds into that one wire? |
|
| Back to top |
|
 |
Weston
Trick Member
Joined: 17 Feb 2003
Location: Minnesota |
| 1. Posted: Mon Feb 25, 2008 9:29 pm Post subject: |
|
|
| It's easier to put all the ground wires into one wire, so you only need to solder once to the circuit. Either way works, just do what works better for you. |
|
| Back to top |
|
|
XTTX
Trick Member
Joined: 13 Aug 2005
Location: Naperville, IL |
| 2. Posted: Mon Feb 25, 2008 11:13 pm Post subject: |
|
|
The latter would be my preference. I would hate to have 4 (or 6 I suppose) grounds connecting to one solder joint.
_________________
-XTTX |
|
| Back to top |
|
|
slvrshdw
Trick Member
Joined: 05 Jan 2005
|
| 3. Posted: Tue Feb 26, 2008 7:00 pm Post subject: |
|
|
one to PCB->branch off into however many you want.
much easier
_________________
|
|
| Back to top |
|
|
|
Forums FAQ
Search
Memberlist
Usergroups
Register
Profile
Login to check your private messages
Login
