| View previous topic :: View next topic |
| Author |
Message |
Snapps50
Trick Member
Joined: 12 Dec 2004
|
40.  Posted: Fri Jan 13, 2006 3:36 pm Post subject: |
 |
|
I'm not saying there is anything wrong or bad about the controllers. They could be very good.
But from may people that have told me about their past experiences, I don't know if I can order one from you guys. If I hear about an improvement in your customer service and shipping, then sure my thought will change. |
|
| Back to top |
|
 |
[B&] DumpsterKeeper
Vivid Member
Joined: 28 Jan 2002
Location: New Jersey (The Dumpster) |
| 41. Posted: Fri Jan 13, 2006 6:34 pm Post subject: |
|
|
| Snapps wrote: |
But from may people that have told me about their past experiences, I don't know if I can order one from you guys. If I hear about an improvement in your customer service and shipping, then sure my thought will change. |
I've greatly improved my shipping times, and streamlined my assembly process to handle more orders at one time. The only time in the past few months I had a large delay to delay product from shipping in under three weeks was caused by my parts company, and not my own fault. Quality sometimes takes time, and I always try to make up for delays by including freebies like Bemani arcade trinkets (Eamuse cards, flyers, etc) or Japanese candy.
When you order from DA, you negotiate with, ask questions to, and receive your product handbuilt with the blood, sweat, and tears of one person: Me. There aren't very many companies (even outside of third party Bemani controllers) that you can say that about. When you order from me, you know you will get quality, and I strive to stick to my 1-2 week (sometimes three, if needed) window.
I'm building new boxes daily, and trying to build up stock so that I have stuff ready to ship within days; but this won't be in full effect until I have some money to buy the extra supplies, like a few months after I've been selling IIDX controllers.
-Steve
_________________
|
|
| Back to top |
|
|
Andrew -Giga-
Trick Member
Joined: 16 Oct 2004
Location: Reston, Va |
| 42. Posted: Sun Jan 15, 2006 2:19 pm Post subject: |
|
|
| DDRNemesis wrote: |
PS, I would rather own one of your pop'n controllers because the Konami ASC isn't that great, but I still think the IIDX KASC is the best, just because it is just about arcade accurate as possible. |
Actually, the KASC is not arcade perfect. I have played on one almost minutes after playing on RED and I noticed alot of differences.
1. The key spacing is different. I don't know the specifics but I'm pretty sure that they are.
2. The ASC does not use sanwas, or for that matter, anything that feels like Sanwas.
3. The turntable is higher on the arcade machine than it is on the ASC.
I'm sure there is alot more, but I'm not exactly a pprofessor on the subject =P
Also, the DASC is built to improve on the ASC so why would you spend 200 some dollars more for worse buttons, worse spacing, arcade inacurate turntable specs and an overall inferior product? Plus, the ASC microswitches burn out after awhile, which means you might just be out of 500 dollars, whereas if somrthing were to happen with your DASC, Steve would be more than happy to help you fix it.
Also, Snapps, please don't bring your Arch0wl mentality over here, nobody appreciates it. |
|
| Back to top |
|
|
DDRNemesis
Trick Member
Joined: 10 Jun 2004
Location: Bryan, OH |
|
| Back to top |
|
|
Andrew -Giga-
Trick Member
Joined: 16 Oct 2004
Location: Reston, Va |
| 44. Posted: Sun Jan 15, 2006 6:48 pm Post subject: |
|
|
| DDRNemesis wrote: | | I'm willing to spend the extra for a KASC because it is official. |
So you want to pay 250 more dollars for an inferior product just because it says Konami on it?
| DDRNemesis wrote: | | IT is built like a rock. |
How is the ASC built like a rock?It's plastic and can break alot easier than a hardened wooden box can.
| DDRNemesis wrote: | | I am also pretty sure the turntable size and key spacings are the exact same as the arcade. |
Well I am positively sure you are wrong. I played on the ASC and the arcade back to back and noticed a difference. If you want to, go look at an ASC turntable an arcade turntable, they are very different. I can pull up pictures if you still can't see the difference. |
|
| Back to top |
|
|
DDRNemesis
Trick Member
Joined: 10 Jun 2004
Location: Bryan, OH |
|
| Back to top |
|
|
mouseish
Trick Member
Joined: 25 May 2005
Location: Lafayette Indiana |
| 46. Posted: Tue Jan 17, 2006 6:00 am Post subject: |
|
|
Just to let you know (from personal experience), I was working in my living room and had a large lighting fixture fall from the cieling onto my DA pop'n controller (knocking it off of its keyboard stand onto the floor). THEY. ARE. BUILT. LIKE. ROCKS. It broke my keyboard stand, which says alot considering this is my stand:
http://www.silentaftermath.com/justin/PopnASC/IM000239.JPG
Just letting you know that you have nothing to worry about with the construction. |
|
| Back to top |
|
|
The Letter K
Trick Member
Joined: 11 Dec 2004
Location: Colonial Heights, VA |
| 47. Posted: Tue Feb 28, 2006 1:24 pm Post subject: |
|
|
Yeah it's a bump. Go figure 
But DASC's are NOW availible, as in they are starting to be shipped out. FTR, Steve takes US KOC's for the Trade-Up as well 
_________________
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB 2 © 2001, 2002 phpBB Group
|
Forums FAQ
Search
Memberlist
Usergroups
Register
Profile
Login to check your private messages
Login
